Last updated: October, 2021. For the latest version, please check our Google Scholar profile.
Innervated, self-sensing liquid crystal elastomer actuators with closed loop control
A. Kotikian, J.M. Morales, A. Lu, J. Mueller, Z.S. Davidson, W. Boley, and J.A. Lewis — Advanced Materials, Wiley, 2021. [link]
Printing reconfigurable bundles of dielectric elastomer fibers
A. Chortos*, J. Mao*, J. Mueller, E. Hajiesmaili, J.A. Lewis, and D.R. Clarke — Proceedings of the National Academy of Sciences (PNAS), 2021.[link]
Voxelated Soft Matter via Multimaterial Multinozzle 3D Printing
M.A. Skylar-Scott*, J. Mueller*, C.W. Visser, and J.A. Lewis — Nature, Nature Publishing Group, 2019. [link]
Transition waves in bistable 2D auxetic structures
L. Jin*, R. Khajehtourian*, J. Mueller*, A. Rafsanjani*, D. Kochmann, and K. Bertoldi — Proceedings of the National Academy of Sciences (PNAS), 2020. [link]
Porous Polymer Architectures with Tunable Properties via Direct Bubble Writing
C.W. Visser, D. Amato, J. Mueller, and J.A. Lewis — Advanced Materials, Wiley, 2019. [link]
Energy Absorption Properties of Periodic and Stochastic 3D Lattice Materials
J. Mueller, K. Matlack, K. Shea, and C. Daraio — Advanced Theory and Simulation, Wiley, 2019. [link]
Tensile Strength of Interfaces in Multi-Material 3D-printed Parts
T. Lumpe, J. Mueller and K. Shea — Materials \& Design, Elsevier, 2019. [link]
Stepwise Graded Struts for Maximizing Energy Absorption
J. Mueller and K. Shea — Extreme Mechanics Letters, Elsevier, 2018. [link]
Stiffness-Independent Toughening of Beams through Coaxial Interfaces
J. Mueller, J.R. Raney, D.M. Kochmann, and K. Shea — Advanced Science, Wiley, 2018. [link]
Buckling, Build orientation, and Scaling Effects in 3D Printed Lattices
J. Mueller, J. Schwarz, and K. Shea — Materials Today Communications, Elsevier, 2018. [link]
Architected Lattices with High Stiffness and Toughness via Multicore-Shell 3D Printing
J. Mueller, J.R. Raney, K. Shea, and J.A. Lewis — Advanced Materials, Wiley, 2018. [link]
Rotational 3D printing of damage-tolerant composites with programmable mechanics
J.R. Raney, B. Compton, J. Mueller, T. Ober, K. Shea, and J.A. Lewis — Proceedings of the National Academy of Sciences (PNAS), 2018. [link]
Mechanical properties of interfaces in inkjet 3D printed single and multi-material parts
J. Mueller, D. Courty, M. Spielhofer, R. Spolenak, and K. Shea — 3D Printing and Additive Manufacturing, Libertpub, 2017. [link]
The Effect of Anisotropy on the Optimization of Additively Manufactured Lattice Structures
T. Stankovic, J. Mueller, and K. Shea — Additive Manufacturing, Elsevier, 2017. [link]
Integrated Design and Simulation of Tunable, Multi-State Structures Fabricated Monolithically with Multi-Material 3D Printing
T. Chen, J. Mueller, and K. Shea — Scientific Reports, Nature Publishing Group, 2017. [link]
Mechanical properties of parts fabricated with inkjet 3D printing through efficient experimental design
J. Mueller, K. Shea, and C. Daraio — Materials \& Design, Elsevier, 2015. [link]
A Generalized Optimality Criteria Method for Optimization of Additively Manufactured Multi-Material Lattice Structures
T. Stankovic, J. Mueller, P. Egan, and K. Shea — Journal of Mechanical Design, Special issue on ''Design for Additive Manufacturing'', 2015. [link]
The Role Height Plays in the Spreading of Liquid Droplets Over Sharp Edges
J. Mueller, N. Haghparastmojaveri, T. Alan, A. Neild — Applied Physics Letters, 2013. [link]
Tensile Strength of Interfaces in Multi-Material 3D-printed Parts
T. Lumpe, J. Mueller and K. Shea — International Solid Freeform Fabrication Symposium, Austin, TX, 2018.
Design and Fabrication of a Bistable Unit Actuator with Multi-material Additive Manufacturing
T. Chen, J. Mueller, and K. Shea — International Solid Freeform Fabrication Symposium, Austin, TX, 2016.
Optimization for Anisotropy in Additively Manufactured Lattice Structures
T. Stankovic, J. Mueller, and K. Shea — ASME Computers and Information in Engineering Conference, Charlotte, NC, 2016.
The effect of build orientation on the mechanical properties in inkjet 3D-printing
J. Mueller and K. Shea — International Solid Freeform Fabrication Symposium, Austin, TX, 2015.
Tensile Properties of Inkjet 3D-printed Parts: Critical Process Parameters and How to Efficiently Analyze Them
J. Mueller, S. Kim, K. Shea, and C. Daraio — ASME Computers and Information in Engineering Conference, Boston, MA, 2015.
Optimization of Additively Manufactured Multi-Material Lattice Structures Using Generalized Optimality Criteria
T. Stankovic, J. Mueller, P. Egan, and K. Shea — ASME Computers and Information in Engineering Conference, Boston, MA, 2015.
Machinability of Aligned CNT Nanocomposites
M. Mahmoodi, M. Malekian, J. Mueller, M.B. Jun, S.S. Park — Int. Conference on Micro Manufacturing (ICOMM) 2011, Tokyo, Japan, Mar. 2011.Innervated, self-sensing liquid crystal elastomer actuators with closed loop control
A. Kotikian, J.M. Morales, A. Lu, J. Mueller, Z.S. Davidson, W. Boley, and J.A. Lewis — Materials Research Society (MRS) Fall Meeting, Boston, MA, USA, 2021.Multimaterial Mechanical Metamaterials with Programmable Response
J. Mueller, J.A. Lewis, K. Bertoldi — MACH Conference, Annapolis, MD, USA, 2021.Utilizing Digital Fabrication to drive Innovation in (Multi-)Functional Materials
J. Mueller — Materials Science Colloquium of the SFB 986, TU Hamburg-Harburg, Germany, 2021.Thermally Reconfigurable Lattice Structures (Poster)
J. Mueller — BASF Northeast Research Alliance (NORA) Symposium, Boston, MA, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — Scientific Symposium 2020, Max Planck Institute for Intelligent Systems, Tübingen, Germany, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — Research Symposium, Max Planck Society, Berlin, Germany, 2020.A digital approach to the creation of a Universal Manufacturing Machine
J. Mueller — University of Stuttgart, Stuttgart, Germany 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — Aarhus University, Aarhus, Denmark, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — University of Colorado, Denver, CO, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — Max Planck Institute for Polymer Research, Mainz, Germany, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — Massachusetts Institute of Technology (MIT), Cambridge, MA, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — University of Iowa, Iowa City, IA, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — Johns Hopkins University, Baltimore, MD, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — Princeton University, Princeton, NJ, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland, 2020.Motion via Bistability in Viscous Fluids
M. Zanaty, W. Zunker, J. Mueller, K. Bertold — Bulletin of the American Physical Society (APS), 2020.Advanced Composite Materials and Structures via Digital Design and Fabrication
J. Mueller — University of Minnesota, Twin Cities, Minneapolis, MN, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — University of California, Los Angeles, CA, USA, 2020.Innervated Artificial Muscles Having Programmable Actuation
A. Chortos*, J. Mao*, J. Mueller, Y. Luo, J.A. Lewis, and D.E. Clarke — Gordon Research Conference (GRC) on Multifunctional Materials and Structures, Ventura, CA, USA, 2020.Advanced Composite Materials and Structures via Digital Design and Fabrication
J. Mueller — University of Waterloo, Waterloo, ON, Canada, 2020.Multimaterial Multinozzle 3D Printing (MM3D)
J. Mueller, M.A. Skylar-Scott, and J.A. Lewis — Gordon Research Conference (GRC) on Robotics, Ventura, CA, USA, 2020.A Computational Approach to the Creation of Digital Matter
J. Mueller — University of British Columbia, Vancouver, BC, Canada, 2020.Active Lattices With Thermally Tunable Properties
J. Mueller, J.A. Lewis, and K. Bertoldi — ASME IMECE, Salt Lake City, UT, USA, 2019.From stretching to bending dominated lattice materials
J. Mueller, K. Bertoldi, and J.A. Lewis — SES Technical Meeting, St. Louis, MO, USA, 2019.Overcoming the conflict between stiffness and toughness in architected lattices
J. Mueller — Cluster of Excellence 3DMM2O, Karlsruhe Institute of Technology, Karlsruhe, Germany, 2019.A computational approach to the creation of digital matter
J. Mueller — Department of Informatics, Karlsruhe Institute of Technology, Karlsruhe, Germany, 2019.Transforming cellular structures via active materials
J. Mueller, D. Kokkinis, K. Bertoldi, and J.A. Lewis — MACH Conference, Annapolis, MD, USA, 2019.Controlled transition waves in two-dimensional bistable auxetics
J. Mueller and K. Bertoldi — Bulletin of the American Physical Society (APS), Boston, MA, USA, 2019.Deployable multi-state structures via pre-strained, multistable elements
J. Mueller, J.A. Lewis, and K. Bertoldi — Materials Research Society (MRS) Fall Meeting, Boston, MA, USA, 2018.Multicore-Shell Printing of Stiff and Tough Lattice Structures
J. Mueller, J.R. Raney, K. Shea, and J.A. Lewis — European Solid Mechanics Conference (ESMC), Bologna, Italy, 2018.Architected Core-Shell Beams for Stiff, Strong, and Tough Cellular Structures
J. Mueller — ABB Ltd., Baden, Switzerland, 2018.Radially Layered Multi-Material Struts for Increased Energy Absorption and Fracture Strain in Stiff Lattice Structures
J. Mueller, J.R. Raney, J.A. Lewis, and K. Shea — Materials Research Society (MRS) Fall Meeting, Boston, MA, USA, 2017.Multiplexed Multi-Material 3D Printing
M.A. Skylar-Scott*, J. Mueller*, C.W. Visser, and J.A. Lewis — Materials Research Society (MRS) Fall Meeting, Boston, MA, USA, 2017.Increased Energy Absorption of Lattice Structures Through Coaxially Aligned Struts
J. Mueller, J.R. Raney, J.A. Lewis, and K. Shea — SES Technical Meeting, Boston, MA, USA, 2017.Rotational 3D printing of bioinspired, damage-tolerant materials
J.R. Raney, B. Compton, J. Mueller, T. Ober, K. Shea, and J.A. Lewis — Mach Conference, Anapolis, MD, USA, 2017.Design for Additive Manufacturing
J. Mueller — Additive Manufacturing Expo (AMX) Showcase Forum, Lucerne, Switzerland, 2016.3D printing of carbon fiber-epoxy composites with programmable fiber orientation
J.R. Raney, B. Compton, J. Mueller, T. Ober, K. Shea, and J.A. Lewis — SES Technical Meeting, College Park, MD, USA, 2016.Material and Process Characterization, Design Automation and Optimization for Digital Fabrication (Poster)
J. Mueller, T. Stankovic, and K. Shea — Symposium on Computational Fabrication, CSAIL MIT, Cambridge, MA, USA, 2016.Introduction to Additive Manufacturing and the Engineering, Design and Computing Lab
J. Mueller — Spritzgussformen aus dem 3D-Printer, Zurich, Switzerland, 2016.
Programmable Metamaterial and Method of Controlling Macroscopic Properties of a Metamaterial
J. Mueller, J.A. Lewis, and K. Bertoldi — US. Prov. Patent 57,803, filed November 13, 2020.
Method of 3D Printing A Cellular Solid
J.A. Lewis, J. Mueller, C.W. Visser, and D.N. Amato — US. Prov. Patent 62/714,892, filed Aug. 6, 2018.
Core-Shell Nozzle for Three-Dimensional Printing and Method of Use
J.A. Lewis, J. Mueller, J.R. Raney, and K. Shea — US. Prov. Patent 62/431,723, granted Dec. 8, 2016. International Application No. PCT/US17/64733, filed December 5, 2017.
3D Printed Core-Shell Filament and Method of 3D Printing a Core-Shell Filament
J.A. Lewis, J. Mueller, J.R. Raney, and K. Shea — US. Prov. Patent 62/431,653, granted December 8, 2016. International Application No. PCT/US17/64734, filed Dec. 5, 2017.
Valved Nozzle with a Compensator and Massively Parallel 3D Printing System
J.A. Lewis, M.A. Skylar-Scott, and J. Mueller — US. Prov. Patent 62/431,223, granted Dec. 7, 2016. International Application No. PCT/US17/64738, filed December 5, 2017.